RTcom Radio Modems Manual do Utilizador descarregar pdf (Página 44)

Page 44

501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780

Field Name Description

Filter Name A free form text eld. Give your lter an intuitive name.

IP Version Version IPv4 is selected by default. IPV6 can be alternately selected. For the lter to be

IPV6 congured and effective requires the gateway be installed on a network that is either

a pure IPV6 network having that protocol enabled or it is both IPV4 and IPV6 dual protocol

enabled/congured. Choosing IPV6 means both the Source and Destination IP address as

described below must be specied in IPV6 format (e.g. the following is an IPV6 compliant,

hexadecimal address.

2001:0DB8:AC10:FE01:0000:0000:0000:0001).

Protocol [TCP/UDP,TCP, UDP, or ICMP] Sets the protocol prole for the lter you are dening. TCP/

UDP is most commonly used.

Source IP address [/prex length] Enter the source IP address of a LAN side host for which you wish to lter/block it’s outgoing

trac for the specied protocol(s).

The individual elds on this screen are dened as follows:

SECURITY

IP Filtering

Outgoing

Add an Outgoing lter when refusal of data from the LAN to the WAN is desired.

After selecting Advanced Setup -> Security -> IP Filtering -> Outgoing from the left navigation bar, click the Add button. The follow-

ing screen will appear to facilitate the ltering you desire. Click Apply/Save to commit the completed entry.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 116 117

Sem comentários

RTcom Radio Modems Manual do Utilizador Página 44